xTool Fire Safety Set

xTool Fire Safety Set

The Safest Possible Way to Detect & Suppress Fire!

Auto Flame Detection: By using 5 fire detection sensors and integrated algorithms of light, temperature, and  position insidethe enclosed laser, xTool Fire Safety set is sensitive to any possible dangers of fire.

Auto Alarm Triggering: Immediately after it detects fire, xTool Fire Safety Set will automatically trigger the alarm, warning users of the fire by continous "beeping" sounds. You can stop the alarm by pushing a button on it,
if you want to deal with the fire in your own way

Auto Power Cut: To prevent further exacerbating the burning fire and protect the laser machine from fire, the smart switch of the xTool Fire Safety Set will shut down the working laser automatically in a few seconds after the alarm sounds.

Auto Fire extinguishing: After seconds of alarming, xTool fire safety set will automatically release the CO2 gas into the enclosed laser and quench the fire with non-toxic and odorless fumes, preventing the laser machine from damage and leaving a clean laser workspace afterwards.

Wide Range of Compatibility: Apply to all lasers that is in < 0.13 m3 enclosed space

• Open Machine with an Enclosure: Use a cover to keep the working space enclosed. As long as the enclosed space is under 0.13m3, xTool Fire Safety Set can extinguish the fire effectively.
• Enclosed Machine: Enclosed machine that has the working space up to 0.13m³ can work with xTool Fire Safety Set. (Be aware that an air tube is needed to put into the enclosed space for it to work)

Contains: 
Control box
Sensor hub
Tube
Tube clamp
Power adapter & cable
Sensor 1
Sensor 2*4
Cable tie pack
Smart switch
3M tape
Cable clamp
CO2 gas bottle *4