Categories
Pages
Dutch English French German
Your shopping cart is empty.
Menu
Header
Enduramark Lasermarkeerspray Glas/Keramiek - Houtskool zwart Enduramark Lasermarkeerspray Glas/Keramiek - Houtskool zwart Enduramark Lasermarkeerspray Glas/Keramiek - Houtskool zwart Enduramark spray pour marquage sur verre/céramique - Charbon de bois​​​​ Enduramark spray pour marquage sur verre/céramique - Charbon de bois​​​​
Enduramark Lasermarkeerspray Glas/Keramiek - Houtskool zwart Enduramark Lasermarkeerspray Glas/Keramiek - Houtskool zwart Enduramark Lasermarkeerspray Glas/Keramiek - Houtskool zwart Enduramark spray pour marquage sur verre/céramique - Charbon de bois​​​​ Enduramark spray pour marquage sur verre/céramique - Charbon de bois​​​​
Enduramark Lasermarkeerspray Glass/Ceramic - Charcoal
Enduramark Lasermarkeerspray Glass/Ceramic - Charcoal Enduramark Charcoal Laser Marking Spray creates a solid charcoal laser engraving on glass or ceramic.  After laser...

Product number

LMS-GLASS-CHAR-CAN

€ 80,28 *
Price per unit
Quantity: 
Order
 

Do you have a question about this product?

Ask us your question

0032/ 54335697
Enduramark Lasermarkeerspray Glass/Ceramic - Charcoal

Enduramark Charcoal Laser Marking Spray creates a solid charcoal laser engraving on glass or ceramic. 
After laser engraving, the unused residual material applied to the metal is easily removed with water.
  • Permanent laser marking - Creates a solid, permanent black mark when laser engraved
  • Fully tested - Weather, chemical, and abrasian durability.
  • Superior formulation - Non-clumping, easy to work with
  • Made in the USA - From domestic and foreign components

Glass
When marking on glass, it is generally best to run your laser at 600 dpi using high power and high speed.
It is best to apply a thick coating of marking material on glass.

Run your laser at the faster end of the speed-settings spectrum
Running your laser too slow can cause the glass to crack or fracture, making the mark lift off of the glass surface. On the other hand, running your laser too fast can cause the mark to rub off. Because our glass-marking material works at a wide range of speeds, optimizing your settings on glass is generally a very forgiving process.

Run your laser at 600 dpi
We recommend that you run your laser at 600 dpi for glass because at 300 dpi, the mark may appear speckled or lighter-colored.

Ceramic
When marking on ceramic, it is generally best to run your laser at 600 dpi using high power and mediumspeed.
It is best to apply a thick coating of marking material on ceramic.

Run your laser toward the middle of the speed-settings spectrum
Although less common than with glass, running your laser too slow with ceramic can cause the ceramic to crack. If cracking occurs, the mark may lift off the ceramic surface or cause an indentation. Like glass, running your laser too fast can also cause the mark to rub off. But also like glass, ceramics will mark under a broad range of settings, so optimization is generally forgiving and straightforward.

Run your laser at 600 dpi
We recommend that you run your laser at 600 dpi for ceramic because at 300 dpi, the mark may appear speckled or lighter-colored.


 

Ask a question about this product

Fields marked with a * are mandatory

Your question has been sent! Thank you.

We will provide you with an answer as soon as possible.

 
't Dreefhuys
Dreefstraat 47
9400 Ninove
BELGIUM
Tel: (0032) 054/33.56.97
Fax: (0032) 054/33.31.92
info@tdreefhuys.com
www.tdreefhuys.com