Truly safe & clean, Feel the difference

6 Filters, clean layer by layer.

SuperCyclone Sparation Technology - The best solution for dust collection

With a cyclone in place, all large particles can be separated,extending the lifespan of filters up to 10 times compared to those without a cyclone.

*Results based on 3mm basswood and acrylic.

Specs:

• Adapted machine: P2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1, F1
• Smart Connect Adapted Machine: M1 Ultra, F1 Ultra, P2S, S1
• Size: 290*491*542mm
• Weight: 20,7kg
• Control mode: Touch button, four adustable gears
• Pre-fitration system: cyclone separation
• Power:220W
• Filter Layers: 
  • SuperCyclone Filter
  • Pre-Filter
  • Medium Efficiency Filter
  • Activated Carbon Layer
  • Ultra-Dense Carbon Mesh
  • High Efficiency Filter
• Noise: 55db

FAQ:

• Is the SafetyPro AP2 compatible with all xTool laser machines?

Yes, Manual mode is compatible with all our lasers: P2S, P2, S1, M1 Ultra, F1 Ultra, D1, D1 Pro, M1, and F1. And auto-mode is only compatible with P2S, S1, M1 Ultra, and F1 Ultra.
 

• Why can only certain models sync?

Syncing the AP2 with the engraving machine requires a Bluetooth dongle for information transmission. At present, only the S1, F1 Ultra, M1 Ultra, and P2S meet this requirement.
 

• Is it compatible with laser machines from other brands?

The diameter size that the product can adapt to is 3 inches，as long as the size of the smoke exhaust pipe of the laser machine meets the requirements.
 

• How can I check if my machine is compatible with the AP2?

The AP2 is designed for machines with a smoke extraction capacity of 150 cubic meters per hour or lower. If your machine falls within this range, it should work with the AP2. However, you will need to prepare the adapter for the exhaust port yourself.
 

• What is the lifespan of the AP2 filter?

The lifespan of each filter layer in the AP2:

• Pre-filter: 100 hours
• Medium Efficiency Filter: 200 hours
• Activated Carbon Filter: 600 hours
• Ultra-Dense Carbon Mesh Filter: 300 hours
• High-efficiency filter: 300 hours

Each 100-hour test includes the following: 75 hours engraving basswood, 22 hours cutting 3mm basswood, 2 hoursengraving acrylic, and 1 hour cutting 3mm acrylic, conducted on the xTool S1 40W. 

*Actual lifespan may vary depending on processing parameters.